Thursday, June 21, 2012

Steampunk Angel Pincushion

Steampunk Angel Pincushion

Tracy here with my latest OTP creation

A steampunk angel pincushion based on a dress form pattern.
I found this awesome online video which gives the basic pattern - and I used this to trace out my pieces. Then it was just a matter of sewing them together, stuffing them with cotton wadding and embellishing.  





To make mine I went to the $2 store (second hand stores are also a good place to hunt for these) and picked up a wooden handy towel holder as the base for my angel. Taking my Tim Holtz Gears Die (BTW hopefully we will have them in stock by end of next week) I cut out a series of gears from a pizza box lid. Using the gears as a mask, I placed them over the fabric and sprayed them with Jack Frost Glimmer Mist and Tattered Leather Glimmer Mist. I then stitched the fabric pieces together and flipped them inside out so that the stitching was on the inside. After stuffing, my angel was all ready to go.

 


Not wanting to waste my gears, I added to them using some Tim Holtz Walnut Stain Embossing Powder, which I just randomly applied. To finish off my 'gear wings' I popped on a Antique bronze Large Flower Filigree (which I cut in half) and one of our Blue Gardenias. 














To get the colour on the metal of the filigrees, I wiped Claudine Hellmuth Studio Multi-Medium with fingers (hey its all about getting dirty ah?) and once dry I sprayed with Jack Frost Glimmer Mist










Before adding the Gardenias I put them onto a piece of acetate and sprayed them with some Jack Frost Glimmer Mist to deepen their blue colour and swooshed them onto the left-over Tattered Leather Glimmer Mist that remained after I had sprayed the gears. This gives them their 'aged' look. The gears and other bits are all hot-glued to the dress form.


 

For the base I used the Claudine Hellmuth Studio Multi-Medium again, which both seals the wood and acts as a glue. Working quickly whilst it was still wet, I added some small washers, coffee brown seed beads, a few more pizza box gears, another blue gardenia, a couple of 2cm roses (both altered with left over bits of glimmermist and embossing powder - they were really handy at cleaning up all the mess) and a pair of petite closed brown rose buds . Another coat of the Claudine Hellmuth Studio Multi-Medium went over the top of everything to help seal it all to the wooden base.


Around her neck I added a length of antique bronze iron chain, with some randomly added 6mm aqua pearls and 6mm dark brown pearls and one of our new Angel Wings with Clock Key Charm. She was very popular at the recent Scrapbooking Expo up in Brisbane, with a number of people commenting on her. 


If you are interested in making your own, check out the video and head off to your local Spotlight for some cheap calico type material. Just don't forget to pop into my2angels for all your embellishing elements.


Monday, June 18, 2012

New Arrivals

New Arrivals in store now at my2angels

and lots of restocks

including glimmer mist (plus a few limited editions)

stazon inks

coredinations cardstock

and Tim Holtz Kraft Coredinations (if you love using black cardstock you MUST get Tim's #24 I guarantee you it is BLACK!)

PLUS 

NEW Tim Holtz limited edition release of 3 exclusive NEW for Spring 2012 Tim Holtz Distress ink pad colors. 
The ink colors are picked raspberry, salty ocean and mowed lawn




New charms to arrive










Embossing Folders from Craft Concepts to kick start your Christmas Cards and Layouts






And these are mega cute & great for your journalling
White Gloss Tags in Kraft Bags



Liquid Pearls in yummy Dark Chocolate and Onyx Pearl




AND New to my2angels

Sew Easy ...
We R Memory Keepers Sew Easy makes adding stitching to your projects easy so you do not have to drag out your sewing machine. This rotary stitch piercer creates perfectly aligned holes using the interchangeable heads


and the interchangeable heads ....










and lots more of new arrivals










Saturday, June 16, 2012

Create an Album with Me Geli ... page 3

Welcome to page 3 of Heidi's album! What would a Russian scrapbook album be without snow! And we did see a lot of snow. 
I am using my Echo Park paper kit and embellishments from my2angels. It's actually more of a summer kit, but you don't need to have snowflake paper to scrap winter photos. I just kept the overall colours fairly cool, with a bit of red thrown in, so it doesn't look washed out. A while ago I learned a cool splatter technique on the my2angels blog. This is coming in handy for a snowball look.

Take a paint dabber and shake it well. Now bang it on to your cardstock as hard as you can and you get these cool splats:


For an icicle look, swipe the paint dabber instead (start from the top and drag it down for a "tail"):

My cardstock now looked like this:


Next cut a 4 1/2" strip of patterned paper and rough up the top edge. Punch two decorative strips of cardstock and glue them along the long sides: 

Sand the edges of 3 photos (each 3x4" big) and stick them down with tape. I left the top edges open because I want to add some tags later. They don't have to be straight.

Cut 3 tags (3x3" each) from white cardstock and add some photos and stickers to pretty them up a little. I have journalling on the other side as well.


Push them under the main photos. This is a great way to add related photos that aren't masterpieces of photography or don't match the colour scheme of your page!

If you are lucky enough to own a rosette die, cut out a 12" strip. It's  so handy because you get all the scoring done in one quick step. You will notice that my strip is longer than my die. That's because I cut 2 and glued them together.


But don't despair if you don't have a die (get one!): You can punch a scallop or zig-zag edge (or use edge scissors) and fold along the design. The strip should be 1 1/2 x 12" long.
Fold it like a concertina and glue the ends together to form a ring:

Also cut out a circle from some scrap cardstock (you won't see it). Spread strong glue all over the circle and press the ring down (pretty edge on the outside), so it sits flat. Hold it for a little while (I put something on top for 2 min)


Decorate the front with a flower sticker:

Glue a snowman and a snowflake charm on an eye pin to make some cute charm sticks with a twine bow:


I bit of foam tape and plenty of glue holds them all in place:


Now put it all together on the page, put a rhinestone on each splatter, add a title and a little bird charm with a twine bow:

And the page is done!


GELI

Saturday, June 9, 2012

Brisbane Scrapbook and Papercraft Convention

my2angels staff are committed to working the long weekend at the Brisbane Scrapbook and Papercraft Convention. During this time, store stock levels for Expo items – flowers, charms, beads and handmade items - may not be a true reflection of actual stock. 

Any ordered items that are out of stock will be given a store credit or refunded (your preference). 

We thank you for your understanding during this busy time. 

At the end of the Expo we are conducting a store-wide stock-take and expect that all stock levels will return to their usual accuracy by Friday. 

We welcome internet orders during the long weekend and stock take period – but remember, the public holiday on Monday will mean shipping will not occur until Tuesday.

Happy Long Weekend Everyone

 

Monday, June 4, 2012

Create an album with Geli pt2 - Sunflower field

Welcome to my 2nd page for the album project. 
If you have missed the step-by -step instructions for the title page, you can find it here.

If I see a sunflower field, I immediately think of Russia. I had these gorgeous photos of us in a large field taken in 97. 
So here is my sunflower page, which you are welcome to copy. You can use other colours of course, they don't have to be sunflowers. Follow the links to find the products I used.

I am basing most of my album pages on a white background. First of all, it creates a little continuity despite the many colours and it stretches my Echo Park kit so much further. To avoid the background feeling empty, create some glimmer mist splashes like this: Unscrew the nozzle and shake it all over the cardstock. It's random and fun.

While you got the glimmer mist out, spray a large mulberry flower. 
These flowers are white and huge, perfect for misting. The best part is that they are very strong and won't tear or loose their shape when they get sprayed.
(I cut off 3 of the petals, because I had planned to use them as leaves on the page, but that didn't happen, so I will keep them for later.) 

Punch 4 small holes in each petal and sew a little cross with baker's twine on each one.


Choose a patterned paper and cut off 4 1/2". Gently fold it in half (don't crease it) and draw a curvy line on the back. Cut it out so it looks something like this:

Distress the curved edge and glue these things onto your background: the curvy paper, the main photo with the flower tucked under and over and a round photo (3 1/4" diameter) added to the middle of the flower:

Paint a thin outline around the round photo with liquid glue and glue some twine around it:

(Yup, that's me and Greg when we were young & beautiful)
***
Do you have any Martha Steward deep edge punches? They are (obviously) great for edges, but you can make pretty flowers and lace strips with them too. The principal is the same with any punch you have, but looks best with the wider designs. I will demonstrate on a short strip of paper, you will need a 12" length.

First, measure from the edge (where the edge of the paper sits when punching) to the end of the design. In my case, 1 1/4". Double that and cut your paper strip to the width. 2 1/2" in my case. 

Line up the paper with the end of the punch, like this: 


Punch the whole strip, as if it were a border. Then turn the strip over and start at the other end of the punch:


 Punch the whole length of the strip and you will end up with a strip of flowers:



Easy. Try some other designs, they all look fab.
***
To make the flowers look like sunflowers, take some large brads, cover the tops in Dimensional Magic and dip them into Microbeads:

 I don't have brown microbeads, so I let them dry and painted them brown. Now glue a paper flower under each punched flower to fill out the design and attach the strip to the background with the microbeaded brads:
Use a fence sticker from the kit, too. 
Now embellish the left corner with a yellow flower, a yellow gardenia, a frangipani and star shaped flower (both inked yellow). Add some mini leaves and large white leaves (glimmer misted in green). Last pop on a little daisy charm and a yellow make a wish tile and you're done!

As you can see, having heaps of white flowers and leaves comes in handy because you can mist or ink them in the shade you need. 
For any of the embellishments I used, pop over to my2angels, the friendliest stop for embellishments I know!
***
Cheers!
GELI